Log Splitter Build Kit 15 hp E-Start Engine 22 GPM Pump, Mount, Coupler Hardware

Description

This kit has Heavy Duty Components for Heavy Duty Splitting
Use the kit to refresh your old, leaky, temperamental splitter or build a new one from scratch! Save hundreds by buying as a bundle.
Please Note: This kit is shipped in multiple packages - All packages might not be delivered the same day
You've seen our hydraulic combo kits around for years, and we're now proud to offer our own line of reliable, easy-starting gasoline engines as part of the combos.  We've tested these engines against Kohler, Briggs & Stratton and a handful of other makes, and have proven ours to be just as reliable in all conditions, AND better starting in the DEEP COLD that can sometimes come with wood splitting activities. Of course, they run just as well in the heat for those that prepare for the winter well in advance! They seem to always start right up, even when we've left old gas in them for a year! (not that you should ever do that!).
We have many varieties of these kits and components, so if you don't see exactly what you want, search our other listings or feel free to contact us!
Product Details:
1.
Tool Tuff Direct 15 Horsepower, Easy-Starting, 420cc
- 15 hp
- 420cc displacement
- Electric Start System (turn-key ignition) with Easy starting recoil pull-start system for backup
- Battery leads included w/terminal clamps
- Air-cooled
- 6.5 L fuel capacity
- 1.1 L Oil sump capacity
- Dual fill ports (one on either end of the engine - Gives you a couple options to work with!)
- EPA Approved (NOT APPROVED FOR SALE IN CALIFORNIA! WE WILL NOT SHIP TO CALIFORNIA!)
- Designed to work with fuels containing up to 10% ethanol
- Standard mounting pattern on crankshaft side and on bottom
- 3.5" x 3.5" Square (5" bolt circle) 4-bolt mounting pattern on crankshaft side for your hydraulic pump, etc.
- Full line of replacement parts available
2.
22 GPM Commercial Duty 2-Stage Hydraulic Pump for Log Splitters
16 and 6 GPM gear-sets combine for 22 GPM total.
Max Pressure 4000psi intermittent, 3000PSI continuous.
Max RPM: 4000
Shaft size 5/8"
Key 3/16"
Inlet 1" NPT
Outlet 3/4" NPT
Requires about 11hp or more to run efficiently.
Looking at shaft side, pump spins clockwise
3.  SAE-A Pump Mount & LO100 LoveJoy Style 3-Jaw Coupler W/ Rubber Spider & Set Screws
-  Contact us if you need an engine coupler different than 1"
-  Commercial duty LO11 3-Jaw coupler
-  Connects pump shaft (5/8" Dia) and engine shaft (1" Dia)
-  Set screws provided (put removable thread locker on them before installation)
-  Pump mount mates pump to motor